Acids Bases Redox and Electrochemistry
Free to read online. For a copy of this book, or to quote, highlight or reproduce any part of it, please request permission through the contact page beforehand.
Preface
This volume of the World Chemistry Series introduces acids, bases, redox and electrochemistry through connected explanations, practical examples and questions for reflection. It is designed as an adaptable educational manuscript for independent study, classroom use and programme development. In chemistry, models and calculations are most useful when their assumptions, units and limits are made explicit.
The material is introductory-to-intermediate in orientation. Teachers should adapt depth and activities to learners’ prior knowledge, local curriculum requirements, available equipment and laboratory safety procedures. Any practical work must be risk-assessed and supervised appropriately.
Learning outcomes
- Explain core concepts using appropriate chemical vocabulary and models.
- Connect particle-level explanations with observable properties and data.
- Apply relevant equations, representations and reasoning methods.
- Evaluate evidence, assumptions, uncertainty and limitations.
- Relate chemistry to technology, society, health or the environment.
Contents
Chapter 1: Acids and Bases
Chapter 2: pH, Indicators and Neutralisation
Chapter 3: Titration and Acid–Base Equilibria
Chapter 4: Oxidation and Reduction
Chapter 5: Electrochemical Cells
Chapter 6: Batteries, Corrosion and Electrochemical Technology
Chapter 1: Acids and Bases
Several models describe acid–base behaviour. The Arrhenius model focuses on ions in aqueous solution; the Brønsted–Lowry model defines acids as proton donors and bases as proton acceptors; the Lewis model describes electron-pair acceptance and donation. Conjugate acid–base pairs differ by one proton in the Brønsted–Lowry framework. Strength describes extent of ionisation or reaction in a specified solvent, while concentration describes amount per volume; these are not interchangeable.
Key points
- Use definitions precisely and state the conditions under which a rule applies.
- Show the reasoning that connects evidence, a model and the conclusion.
- Check units, assumptions and whether the result is physically or chemically plausible.
Worked example / application
Application: Begin with a clearly stated observation, select the chemical model that best explains it, and check the explanation against quantitative or comparative evidence. State any assumptions that could affect the conclusion.
Practice and discussion
Identify acid, base and conjugate pairs in a reaction. Explain why a concentrated weak acid and a dilute strong acid cannot be compared using strength alone.
1. Define the central terms in this chapter and give an example of each.
2. Draw, calculate or otherwise represent one key idea from the chapter. Explain each step.
3. Identify one limitation of the model or method used and suggest how evidence could improve the explanation.
Chapter 2: pH, Indicators and Neutralisation
For dilute aqueous solutions, pH is commonly introduced as −log₁₀[H⁺], with more rigorous definitions based on hydrogen-ion activity. A change of one pH unit corresponds to a tenfold change in hydrogen-ion activity. Indicators change colour over a characteristic range; pH meters provide instrumental measurements but require calibration. Neutralisation often forms water and a salt, though actual products depend on the acid, base and conditions.
Key points
- Use definitions precisely and state the conditions under which a rule applies.
- Show the reasoning that connects evidence, a model and the conclusion.
- Check units, assumptions and whether the result is physically or chemically plausible.
Worked example / application
Application: In a titration, the measured volume is converted to moles using the known concentration, then the balanced equation provides the mole ratio needed to calculate the unknown.
Practice and discussion
Estimate pH from hydrogen-ion concentration and interpret the logarithmic scale carefully. Choose an indicator suited to the expected titration endpoint.
1. Define the central terms in this chapter and give an example of each.
2. Draw, calculate or otherwise represent one key idea from the chapter. Explain each step.
3. Identify one limitation of the model or method used and suggest how evidence could improve the explanation.
Chapter 3: Titration and Acid–Base Equilibria
Titration uses a solution of known concentration to determine an unknown amount through a measured reaction ratio. A balanced equation is essential: the endpoint indicator change is an experimental signal, while the equivalence point is the stoichiometric condition. They should be close for a suitable indicator. Weak acids and bases establish equilibria, so their pH depends on dissociation constants and concentration, not only stoichiometry.
Key points
- Use definitions precisely and state the conditions under which a rule applies.
- Show the reasoning that connects evidence, a model and the conclusion.
- Check units, assumptions and whether the result is physically or chemically plausible.
Worked example / application
Application: In a titration, the measured volume is converted to moles using the known concentration, then the balanced equation provides the mole ratio needed to calculate the unknown.
Practice and discussion
Plan a titration calculation by converting measured volume to moles, applying the balanced equation, and calculating the unknown concentration. Record burette readings consistently and use concordant titres.
1. Define the central terms in this chapter and give an example of each.
2. Draw, calculate or otherwise represent one key idea from the chapter. Explain each step.
3. Identify one limitation of the model or method used and suggest how evidence could improve the explanation.
Chapter 4: Oxidation and Reduction
Redox reactions involve electron transfer or changes in oxidation state. Oxidation is an increase in oxidation state and reduction is a decrease. Oxidising agents accept electrons and are reduced; reducing agents donate electrons and are oxidised. Oxidation numbers are bookkeeping tools that help identify electron transfer even when electrons are not transferred as free particles. Half-equations separate oxidation and reduction and can be combined after balancing atoms and charge.
Key points
- Use definitions precisely and state the conditions under which a rule applies.
- Show the reasoning that connects evidence, a model and the conclusion.
- Check units, assumptions and whether the result is physically or chemically plausible.
Worked example / application
Application: In a titration, the measured volume is converted to moles using the known concentration, then the balanced equation provides the mole ratio needed to calculate the unknown.
Practice and discussion
Assign oxidation states and identify the species oxidised and reduced. Balance half-equations in acidic or alkaline conditions using the appropriate method and check both atoms and charge.
1. Define the central terms in this chapter and give an example of each.
2. Draw, calculate or otherwise represent one key idea from the chapter. Explain each step.
3. Identify one limitation of the model or method used and suggest how evidence could improve the explanation.
Chapter 5: Electrochemical Cells
Electrochemical cells connect redox reactions with electrical energy. In galvanic cells, a spontaneous redox reaction produces electrical work; in electrolytic cells, external electrical energy drives a non-spontaneous reaction. Oxidation occurs at the anode and reduction at the cathode in both types. Electron flow in the external circuit and ion movement in the electrolyte maintain charge balance. Cell potential depends on electrode potentials and conditions.
Key points
- Use definitions precisely and state the conditions under which a rule applies.
- Show the reasoning that connects evidence, a model and the conclusion.
- Check units, assumptions and whether the result is physically or chemically plausible.
Worked example / application
Application: Begin with a clearly stated observation, select the chemical model that best explains it, and check the explanation against quantitative or comparative evidence. State any assumptions that could affect the conclusion.
Practice and discussion
Label anode, cathode, electron flow and ion movement. Distinguish cell notation, standard potentials and actual cell voltage under non-standard conditions.
1. Define the central terms in this chapter and give an example of each.
2. Draw, calculate or otherwise represent one key idea from the chapter. Explain each step.
3. Identify one limitation of the model or method used and suggest how evidence could improve the explanation.
Chapter 6: Batteries, Corrosion and Electrochemical Technology
Batteries store energy through chemical systems and differ in chemistry, voltage, energy density, power, lifetime, safety and recyclability. Corrosion is an electrochemical process that can be slowed by coatings, alloy design, inhibitors or cathodic protection. Electrolysis supports metal extraction, electroplating and chemical manufacture, but its environmental performance depends on electricity sources, material inputs and waste handling.
Key points
- Use definitions precisely and state the conditions under which a rule applies.
- Show the reasoning that connects evidence, a model and the conclusion.
- Check units, assumptions and whether the result is physically or chemically plausible.
Worked example / application
Application: Begin with a clearly stated observation, select the chemical model that best explains it, and check the explanation against quantitative or comparative evidence. State any assumptions that could affect the conclusion.
Practice and discussion
Compare battery or corrosion-control options for a stated application. Consider performance, cost, maintenance, critical materials and end-of-life recovery.
1. Define the central terms in this chapter and give an example of each.
2. Draw, calculate or otherwise represent one key idea from the chapter. Explain each step.
3. Identify one limitation of the model or method used and suggest how evidence could improve the explanation.
Review questions
- Which central concept in this volume is most useful for explaining an observable chemical property? Explain why.
- Describe a situation in which a chemical model is useful but incomplete.
- What measurements or evidence would help distinguish two competing explanations?
- Identify a safety, ethical or environmental issue relevant to the topics studied.
- Choose one calculation or representation and show how you would check the result.
- How could the material in this volume be applied to a real problem?
Practical project
Develop a small, safe investigation or case study linked to one chapter. Write a question, background rationale, method or research plan, risk and ethics considerations, data table or evidence plan, analysis approach and conclusion. Do not conduct experiments with hazardous substances without appropriate training, supervision and approved procedures.
Glossary
Accuracy: Closeness of a measurement or result to an accepted reference value.
Concentration: Amount of a component expressed relative to a defined volume or mass.
Model: A simplified representation used to explain, predict or organise observations.
Mole: SI unit for amount of substance, containing exactly 6.02214076 × 10²³ specified entities.
Reaction: A chemical transformation involving changes in the arrangement and bonding of atoms.
Uncertainty: A quantified or described limitation in the knowledge of a measured value.
Further reading and references
The references below provide established textbooks and terminology resources for extending the material. Check edition details and current guidance before formal publication.
- Atkins, P., de Paula, J. and Keeler, J. (2018). Atkins’ Physical Chemistry. 11th ed. Oxford University Press.
- Brown, T. L., LeMay, H. E., Bursten, B. E., Murphy, C. J., Woodward, P. M. and Stoltzfus, M. W. (2018). Chemistry: The Central Science. 14th ed. Pearson.
- Clayden, J., Greeves, N. and Warren, S. (2012). Organic Chemistry. 2nd ed. Oxford University Press.
- Flowers, P., Theopold, K., Langley, R. and Robinson, W. R. (2019). Chemistry 2e. OpenStax, Rice University.
- Housecroft, C. E. and Sharpe, A. G. (2018). Inorganic Chemistry. 5th ed. Pearson.
- IUPAC (2019). Compendium of Chemical Terminology (the Gold Book). International Union of Pure and Applied Chemistry.
- International Union of Pure and Applied Chemistry (various years). Standard definitions and terminology for chemical sciences.
- McMurry, J. (2016). Fundamentals of Organic Chemistry. 7th ed. Cengage Learning.
- United Nations Environment Programme (2019). Global Chemicals Outlook II: From Legacies to Innovative Solutions. UNEP.
- World Health Organization (various years). Chemical safety and environmental health guidance.
Editorial note: This is an educational manuscript draft, not a claim of accreditation, regulatory approval or endorsement. A chemistry subject specialist should verify technical detail, references, curriculum alignment and all practical activities before publication or formal assessment use.