Electrical and Electronic Engineering
Free to read online. For a copy of this book, or to quote, highlight or reproduce any part of it, please request permission through the contact page beforehand.
Preface
This volume introduces core concepts and practical ways of thinking in electrical and electronic engineering. It is designed for learners, educators and readers who want a structured foundation for further study. The emphasis is on explaining principles, connecting theory to applications, and encouraging careful judgement.
Engineering and applied science change as methods, evidence and standards develop. This text is an educational resource, not a substitute for accredited professional training, current codes, manufacturer instructions or specialist review. Practical work should be undertaken only with suitable supervision, equipment and safety controls.
How to Use This Book
Read each chapter in sequence, note unfamiliar terms, and work through the questions at the end. For projects, state assumptions, use consistent units, record evidence and distinguish measured facts from estimates.
Contents
- Chapter 1: Electrical Quantities and Circuit Foundations
- Chapter 2: AC Circuits, Fields and Electromagnetism
- Chapter 3: Digital Electronics and Embedded Systems
- Chapter 4: Power Engineering and Electrical Machines
- Chapter 5: Signals, Control and Instrumentation
- Chapter 6: Safety, Standards and Responsible Electronics
Applied project and review questions
Chapter 1: Electrical Quantities and Circuit Foundations
Electrical engineering studies the generation, conversion, transmission and use of electrical energy, as well as the circuits that process information. Voltage describes electrical potential difference, current is the rate of charge flow, resistance relates voltage and current in an ohmic element, and power measures the rate of energy transfer. Consistent units and sign conventions are essential when analysing a circuit. Kirchhoff's current law expresses conservation of charge at a node, while Kirchhoff's voltage law expresses energy conservation around a loop. Series and parallel networks can be simplified using equivalent resistance, voltage division and current division. More complex circuits are approached with systematic nodal or mesh analysis, followed by checks that the results satisfy the original equations.
Components have practical limits. Resistors dissipate heat, capacitors store energy in electric fields, and inductors store energy in magnetic fields. Real components include tolerances, parasitic effects and frequency-dependent behaviour. Safe work practices include de-energising equipment, verifying absence of voltage, using correctly rated instruments and understanding that capacitors may retain charge after power is removed.
Key ideas
- Electrical engineering studies the generation, conversion, transmission and use of electrical energy, as well as the circuits that process information.
- Voltage describes electrical potential difference, current is the rate of charge flow, resistance relates voltage and current in an ohmic element, and power measures the rate of energy transfer.
- Consistent units and sign conventions are essential when analysing a circuit.
Review and application
- What are the principal concepts in electrical quantities and circuit foundations, and how do they connect to the wider system?
- Which assumptions would you state before analysing a real example, and how could those assumptions be checked?
- What measurements, tests or independent evidence would increase confidence in a design or conclusion?
- Identify one safety, ethical, environmental or lifecycle consideration that should influence a practical decision.
Chapter 2: AC Circuits, Fields and Electromagnetism
Alternating-current systems vary with time and are often represented using sinusoidal waveforms and phasors. Resistance, inductive reactance and capacitive reactance determine the magnitude and phase of current. Impedance combines these effects, while resonance occurs when inductive and capacitive effects balance under specified conditions. Power calculations distinguish real power, reactive power and apparent power. Electric and magnetic fields explain the operation of capacitors, inductors, transformers, motors and generators. Faraday's law links changing magnetic flux to induced voltage; Lenz's law gives the direction that opposes the change producing it. These principles underpin electromagnetic conversion and also explain interference, shielding, inductive heating and the need to manage stray fields in sensitive equipment.
Circuit analysis should account for source impedance, grounding, insulation, electromagnetic compatibility and component ratings. A circuit that functions on a bench may behave differently when connected to long cables, a noisy supply or an enclosure. Good engineering combines analytical prediction with measurement using appropriate probes, bandwidth limits and safe measurement procedures.
Key ideas
- Alternating-current systems vary with time and are often represented using sinusoidal waveforms and phasors.
- Resistance, inductive reactance and capacitive reactance determine the magnitude and phase of current.
- Impedance combines these effects, while resonance occurs when inductive and capacitive effects balance under specified conditions.
Review and application
- What are the principal concepts in ac circuits, fields and electromagnetism, and how do they connect to the wider system?
- Which assumptions would you state before analysing a real example, and how could those assumptions be checked?
- What measurements, tests or independent evidence would increase confidence in a design or conclusion?
- Identify one safety, ethical, environmental or lifecycle consideration that should influence a practical decision.
Chapter 3: Digital Electronics and Embedded Systems
Digital systems represent information using discrete logic states. Boolean algebra and logic gates support combinational circuits, while registers and flip-flops store state in sequential circuits. Timing, clocking, setup and hold requirements, propagation delay and power consumption influence whether a digital design operates reliably. Programmable logic and microcontrollers allow designers to implement complex behaviour in compact systems. Embedded systems combine hardware, firmware, sensors and actuators to perform a defined function. Requirements should specify inputs, outputs, timing, fault response and operating conditions. Firmware should be structured for readability and testing, with clear handling of invalid sensor values and unexpected states. Watchdogs, diagnostics and safe default behaviours can reduce the consequences of software faults, though they do not replace sound hardware design.
Communication between devices may use wired or wireless interfaces and defined protocols. Engineers must consider data integrity, latency, interference, authentication and update procedures. Security and safety are increasingly connected: an unauthorised command or corrupted measurement can affect physical equipment. Secure development therefore includes threat assessment, least-privilege access, verified updates and plans for end-of-life support.
Key ideas
- Digital systems represent information using discrete logic states.
- Boolean algebra and logic gates support combinational circuits, while registers and flip-flops store state in sequential circuits.
- Timing, clocking, setup and hold requirements, propagation delay and power consumption influence whether a digital design operates reliably.
Review and application
- What are the principal concepts in digital electronics and embedded systems, and how do they connect to the wider system?
- Which assumptions would you state before analysing a real example, and how could those assumptions be checked?
- What measurements, tests or independent evidence would increase confidence in a design or conclusion?
- Identify one safety, ethical, environmental or lifecycle consideration that should influence a practical decision.
Chapter 4: Power Engineering and Electrical Machines
Power engineering manages electricity from generation through transmission, distribution and end use. Transformers change AC voltage levels; switchgear and protection devices isolate faults; and power-system studies assess load flow, voltage stability and short-circuit behaviour. Protection must be coordinated so that faults are cleared quickly while unnecessary outages are minimised. Electric machines convert electrical and mechanical energy. Motors are selected according to torque-speed requirements, duty cycle, efficiency, cooling and control method. Generators convert mechanical input to electrical output. Power electronics—rectifiers, inverters and DC-DC converters—control energy flow between sources, storage and loads. Their switching behaviour creates efficiency benefits but can introduce harmonics and electromagnetic noise.
Modern grids integrate variable renewable generation, storage, flexible demand and digital monitoring. Engineers must consider frequency and voltage control, resilience, power quality and the consequences of equipment failure. Battery systems require protection against overcurrent, overtemperature and unsafe operating conditions. Grid connection rules and electrical codes vary by jurisdiction and must be checked for each project.
Key ideas
- Power engineering manages electricity from generation through transmission, distribution and end use.
- Transformers change AC voltage levels; switchgear and protection devices isolate faults; and power-system studies assess load flow, voltage stability and short-circuit behaviour.
- Protection must be coordinated so that faults are cleared quickly while unnecessary outages are minimised.
Review and application
- What are the principal concepts in power engineering and electrical machines, and how do they connect to the wider system?
- Which assumptions would you state before analysing a real example, and how could those assumptions be checked?
- What measurements, tests or independent evidence would increase confidence in a design or conclusion?
- Identify one safety, ethical, environmental or lifecycle consideration that should influence a practical decision.
Chapter 5: Signals, Control and Instrumentation
Signals carry information about physical processes. Continuous-time and discrete-time representations help engineers analyse sensor outputs, audio, communications and control feedback. Sampling must be sufficiently fast to capture the relevant signal content, and anti-alias filtering may be needed before conversion. Noise, offset, drift and quantisation affect measurement quality. A feedback control system compares a measured output with a desired reference and adjusts an input to reduce error. Stability, response time, overshoot and robustness are important design criteria. Proportional, integral and derivative actions can improve performance when tuned appropriately, but poor tuning may amplify noise or create oscillation. Instrumentation must also be calibrated and traceable to suitable references.
Testing a control system should cover normal operation, disturbances, sensor failures, actuator limits and recovery behaviour. Simulation is useful for exploring a range of scenarios, but physical testing remains necessary when real-world effects are not fully represented. Engineers should record test conditions, measurement uncertainty and deviations from the expected response.
Key ideas
- Signals carry information about physical processes.
- Continuous-time and discrete-time representations help engineers analyse sensor outputs, audio, communications and control feedback.
- Sampling must be sufficiently fast to capture the relevant signal content, and anti-alias filtering may be needed before conversion.
Review and application
- What are the principal concepts in signals, control and instrumentation, and how do they connect to the wider system?
- Which assumptions would you state before analysing a real example, and how could those assumptions be checked?
- What measurements, tests or independent evidence would increase confidence in a design or conclusion?
- Identify one safety, ethical, environmental or lifecycle consideration that should influence a practical decision.
Chapter 6: Safety, Standards and Responsible Electronics
Electrical hazards include shock, arc flash, fire, stored energy and unexpected machine movement. Risk depends on voltage, current path, exposure duration, environment and available protective measures. Appropriate isolation, earthing, overcurrent protection, guarding, warning labels and training are essential. Work should follow applicable regulations and organisational procedures, not informal assumptions. Electronic products also create environmental and social responsibilities. Design decisions affect energy use, repairability, component sourcing, hazardous substances and electronic waste. Longer service life, modular repair, efficient standby modes and responsible recycling can reduce impacts. Accessibility and human factors should be included where interfaces are used by people with different abilities or levels of expertise.
Professional engineering requires transparent documentation, independent checking for consequential systems and truthful reporting of test results. Standards provide common expectations for safety, compatibility and performance, but compliance alone does not guarantee that every risk has been eliminated. Engineers should identify residual risks and explain them clearly to users, operators and decision-makers.
Key ideas
- Electrical hazards include shock, arc flash, fire, stored energy and unexpected machine movement.
- Risk depends on voltage, current path, exposure duration, environment and available protective measures.
- Appropriate isolation, earthing, overcurrent protection, guarding, warning labels and training are essential.
Review and application
- What are the principal concepts in safety, standards and responsible electronics, and how do they connect to the wider system?
- Which assumptions would you state before analysing a real example, and how could those assumptions be checked?
- What measurements, tests or independent evidence would increase confidence in a design or conclusion?
- Identify one safety, ethical, environmental or lifecycle consideration that should influence a practical decision.
Applied Project
Develop a small, clearly bounded project related to electrical and electronic engineering. Define the need, success criteria, constraints and hazards. Prepare a system diagram or model, justify the methods selected, and identify what data would be required. If practical testing is appropriate, obtain supervision and complete a risk assessment first.
Suggested project report structure
- Problem statement and objectives
- Background and governing principles
- Method, assumptions and equipment
- Risk assessment and safeguards
- Results with units and uncertainty
- Discussion, limitations and alternatives
- Conclusion and recommendations
- References and supporting records
Conclusion
The central lesson of electrical and electronic engineering is that dependable results emerge from sound principles, appropriate models, careful measurement, and transparent evaluation of limitations. Technical choices should be judged not only by whether they work once, but by whether they remain safe, explainable, maintainable and fit for purpose.
Further Reading and Reference Guidance
For formal study, consult current university textbooks, peer-reviewed papers, professional engineering handbooks, manufacturer technical documentation and the standards or regulations applicable in your jurisdiction. Confirm the edition and current status of any standard before using it in design or practice.
Recommended source categories include: introductory engineering science texts; discipline-specific design handbooks; peer-reviewed review articles; national metrology and safety guidance; and technical standards from recognised standards bodies.